Ford F150 is a powerful truck for tackling different extreme trails. However, everyone wants to make his ride more powerful at a low cost. From this perspective, a cold air intake is the best option to increase your F150 performance at an affordable price. It is easy to install a cold air intake in F150, which allows your truck engine to intake more cold and dense air in the combustion chamber and make the fuel-burning process smoother and more accessible.Â
Cold air intake prevents fuel from wasting, increasing your truck millage. So it benefits your truck engine, increasing your truck acceleration and torque. As I researched and asked many truck owners, a cold air intake increases their truck performance and does not harm your truck engine. But many people need help choosing the best cold air intake for f150 EcoBoost for their trucks. Therefore, I am writing this informative article to help you make the best decision. These are some best cold air intake for F150 Ecoboost.
Table of Contents
What is the cold air intake, and how it works
The combustion process is the main component of a vehicle engine which require a good ratio of fuel and air mixture for the best performance. But if this ratio is unbalanced, your vehicle decreases performance like a decrease in millage, less acceleration, and throttle response. On the other hand, every truck driver wants to increase his acceleration and throttle while towing and driving on off-road tracks.Â
A cold air intake is a modern modification that does not allow hot air to enter the combustion chamber because hot air is less dense and does not allow fuel to burn completely. While on the other hand, cold air is denser and allows fuel to burn completely in the combustion chamber. The process of cold air intake is to increase the volume of entering air and reduce its resistance. The filter used in cold air intake is made of highly dense material with a narrow opening and is designed to flow more air toward the combustion chamber. The narrow space of cold air intake allows a large volume of air to flow toward cylinders.Â
The Acceleration of a vehicle depends upon the airflow coming to the combustion chamber, while a stock air intake does not provide enough air to the engine. As a cold air intake protects your truck engine from heating up, this is the best modification for those who drive in hot climate areas and use their truck to tow heavy stuff or vehicles.
These are 7 Best cold Air intake for f150
1. AEM 21-8128DCÂ Cold Air Intake for 3.5 Ecoboost
AEM 21-8128DC is one of the best cold air intakes, allowing 50% more airflow to your truck engine, increasing your truck torque and horsepower, and improving your truck engine sound. Its dual intake feature ensures it carries more air to the engine than the stock intake. Many F150 owners highly recommend this one as its oiled synthetic filter design protects your truck engine from damage. In addition, it gives you a more throttle response while towing heavy things and vehicles behind your truck.Â
AEM 21-8128DC is specially designed for Ford F150 EcoBoost models, so you don’t face any fitting issues. Its washable synthetic filter allows more air flow to your truck engine. The airflow tube is made of mandrel-blent aluminum, which is heat resistant and durable, and also protected with an airbox that protects it from engine heat.
 AEM 21-8128DC is fully compatible with all factory devices like heat temperature sensors. Moreover, this air intake needs less maintenance as you have to clean it after 100000 miles.
Installation
You can install it with proper knowledge within 45 mint to one hour. Otherwise, it is mechanical work, I recommend hiring a professional for perfect installation and better performance.
2. aFe Power Magnum FORCE 54-12192 for Ford F-150 EcoBoost
aFe Power Magnum FORCE 54-12192 is one of the best cold air intakes for Ford f150. It has a dual tube and dual filters, which allows 44% more cold air intake than stock air intake, and it provides 32 horsepower & 35 lbs torque to your F150.Â
Magnum Force feature with high-quality heat resistance metal pipes ensures cold air with maximum airflow to the combustion chamber. In addition, it has an airbox that works as a shield and protects filter from engine heat. Filters are made of washable five-layer cotton gauze for maximum airflow.
aFe cold air intake enhances your noticeable vehicle performance. And this cold air intake is legal in all 50 states of the US because it does not damage your vehicle engine and to improve your truck engine within its limits.
The H-shape dual metal pipes with delicate curves ensure maximum airflow and velocity, increasing throttle response. In addition, a shield is mounted below the air intake, protecting it from engine heat. As I asked many truck owners about this product’s performance, they told me they were satisfied after installing it.
Also Read: Best Shocks for Silverado 1500 2wd
Installation
Easy To install with proper instructions, you can easily install it within one hour.
3. K&N 63-2592 Cold Air Intake for 3.5 Ecoboost
Suppose you are concerned that a Cold air intake is going to damage your truck engine and they do not enhance your truck performance, then forget about it. K&N 63-2592 is one of the best cold air intakes for the f150 EcoBoost, which gives outstanding airflow and filtration and the best protection to your truck engine and produces less noise them other cold air intakes.
K&N 63-2592 cold air intake is available for Ford f150 and other vehicle models. This product is highly rated on amazon and recommended by many Ford f150 owners. Conical-shaped K&N filter allow 50% more air intake than a standard stock air intake. An OEM air intake reduces your engine performance, while on the other hand, a K&N air intake is designed in a conical shape to carry cold air from outside without any resistance.
K&N 63-2592 cold air intake is specially designed to increase your truck engine, torque, horsepower, and acceleration by increasing cold airflow to the combustion chamber without damaging and effection other parts of your truck. It has universal fitting without interrupting additional parts and is fully compatible with factory devices like fuel gauges, heat sensors, etc.Â
Many truck owners mentioned that K&N 63-2592 provides them with outstanding throttle response on off-road and mountain trails. It is designed aerodynamically to carry more airflow to the cylinder, delivering more throttle response on off-road trails and extreme roads.Â
K&N 63-2592 has a bigger filter size than a stock air intake, which filters more dirt and gives more protection to your truck engine. In addition, K&N intake pipes are made of high-quality silicone strengthened with nylon, which protects pipes from engine heat and gives them a long life. Although this cold air intake requires less maintenance, you must clean them after 100,000 miles.
Installation
You can install this intake with basic hand tools and proper instructions. Otherwise, take your truck to car customs for installation.
4. Spectre Performance Air Intake Kit for Ford f150
Specter performance air intake is one of the best cheap Cold air intakes for the Ford f150. Exceptionally uniquely designed to increase horsepower and torque by increasing airflow to the combustion chamber. Outstanding throttle response is highly noticeable while driving off-road and while towing heavy vehicles and stuff behind your truck.
And its advanced oil synthetic filter protects your truck engine from debris and other harmful particles. It is protected with a dual-layered shield that protects this intake from engine heat and doesn’t let hot air enter the air intake inlet. In addition, Specter Performance air intake filter is made of non-woven synthetic material, allowing 50% more airflow to the engine.
 The intake tubes are made of aluminuim and stainless steel, which are highly heat resistant. This air intake is dyno tested for a guaranteed increase of horsepower, torque, and throttle response and requires less maintenance. You have to clean it after 100,000 miles. This is the best product for those who need more affordable cold air intake but want to increase their truck performance and protection.
Installation
Easy to install, no drilling required, you can easily install this air intake with proper knowledge within one hour. But if you find it difficult, hire a professional who charges a few dollars for installation.
5. Roush 422089 Cold Air Intake 2018-2020 for Ford F-150 EcoBoost
Roush 422089 is one of the best cold air intakes for Ford f150 but is a little bit expensive. Smart design reduces 25% resistance during air intake, allowing maximum airflow to the f150 engine and enhancing your truck engine sound. Compared to stock intake, a big airbox and filter allow more air and don’t let your truck engine heat up.Â
Very simple and easy to install; no calibration is required, including rubber couplers for perfect fitting. This cold air intake is made of high heat-resistant rubber that protects it from engine heat.Â
The manufacturers of this product ensure that this is a high-tech cold air intake that does not void your truck factory warranty. After installing this air intake, they ensure that you feel a noticeable change boost in horsepower, torque, and millage. But as I mentioned above that this is an expensive air intake, if you can not afford this, there is also a cheap air intake for the Ford f150 mentioned above.
Installation
Roush 422089 Cold air intake is very simple and easy to install; you can install it by watching a few youtube videos.
6. Injen PF9015P Power Flow Air Intake
Injen PF9015P intake is one of the best but a little costly intake for Ford f150, which supervised increase your vehicle performance. By installing this air intake, you feel noticeable changes in acceleration, horsepower, and mileage of your truck. Its dyno tested to increase your truck’s Hp +11 and torque to 24 lb-ft. Injen designed this air intake with dual aluminum pipes, maximizing air flow by reducing resistance.
Injen intake contains two super-nano web dry air filters, which offer the best protection and aggressive sound to your truck engine. Highly heat-resisted aluminum tubes protect this intake from carrying hot air to the engine. Injen is very well known for its cold air intake and has years of experience in this field. If you are worried about damage and other casualties, then forget about these things after installing this air intake. This costly air intake proves the best protection for your truck engine and does not void any warranty.
Installation
Very easy to install by reading the installation guide provided or by watching youtube videos.
7. S&B Filters 75-5081 Cold Air Intake Ford F-150 2.7L & 3.5L Ecoboost
S&B Filters 75-5081 Cold Air Intake provides 44% more airflow and has a 99% efficiency rating. This air intake is specially designed for EcoBoost engines to increase their mileage and performance. You can also notice this performance while driving your truck off-road and towing heavy stuff behind your truck. After installing this air intake, you must forget about your engine check light, as 44% more airflow protects your engine from heating up.
S&B Filters 75-5081Â is costly but recommended by many truck owners because of their performance. This air intake is made of premium quality silicone which makes it highly heat resistant and protects it from engine heat. And its high-quality silicone filter provides the best filtration.
Some people mentioned that this air intake does not show any changes in millage, but they feel a boost in acceleration. So if you want both acceleration and millage, then choose another intake.
Installation
Easy to install with essential tools and instructions within one hour.
Roush 421981 Cold Air Intake For Ford F150 Ecoboost
As you know that increasing your vehicle power with a cold air intake is not legal in some states of the US, But don’t worry, Roush cold air intake is legal in 50 states of the US. Roush 421981 is made of Ford f150 EcoBoost v6 2015-2017 models. The smart design of Roush 421981 provides 40% more airflow than factory stock intake, enhances truck performance by increasing acceleration and millage, and does not void your vehicle warranty.Â
Give a very good throttle response when you press acceleration paddle while towing and driving on off-road tracks. Many Ford f150 owners highly recommended this product on Amazon as they mentioned that it’s easy to install and boosts acceleration, and increases engine turbo sound.
Installation
Very easy to install with instructions included along, you can install it in 1 hour.
Conclusion
Installing requires a lot of time and research; you have to find a suitable location under the hood to protect cold air intake from engine heat. But all above mentioned cold air intake for Ford f150 is easy to install and needs essential tools.Â
If you are thinking of installing a cold air intake in your vehicle, then mind that if your truck has a stock engine and is not modified, the change done by a cold air intake is minor and less noticeable. Although, according to my research, a cold air intake is not a reasonable modification for a stock engine, you may have to change the position of many factory devices to install a cold air intake.
Buying a high-quality filter and reducing air resistance by increasing the air inlet area is the best option for a stock engine.
Frequently Asked Questions
How much power does a cold air intake add to a 3.5 EcoBoost?
A cold air intake creates up to 26 HP in your vehicle engine and increases throttle response.
Does cold air intake help the Ecoboost engine?
Yes, a cold air intake brings noticeable changes by increasing mileage, horsepower, and torque.
Are cold air intakes good for turbos?
Yes, cold air intake is good for turbo as turbo heat up the truck engine, while on the other hand, cold air intake reduces engine heat by allowing cold air into the engine and doesn’t let the engine heat up.Â
What is the most high-engineered cold air intake system on the market?
Roush claims that they made the market’s most advanced cold air intake.
Does more airflow increase horsepower?
As your know, increased air flow triggers the engine to add more fuel to the fuel/air mixture. More Fuel/air mixtures mean a more efficient burning process which means more horsepower. So, yes increase in airflow add more horsepower.
How to clean a cold air intake filter?
Most people use an air compressor to clean their intake filters, but some filters are washable, so it is good to wash them.
What happens if you don’t clean your air intake?
If you don’t clean your vehicle’s air intake on time, then it may cause damage to your engine. Also, decreased performance, like less throttle response, reduced horsepower, and more fuel consumption.
